MLCP Press Fit Equal Tee

An MLCP press fit equal tee takes a branch off a multilayer pipe run (MLCP or PEX-AL-PEX), with all three ends the same size. Use it on heating, underfloor heating and hot and cold water pipework where one run needs to split in two.

Why installers use it

• Same size all round: 16, 20, 25 or 32mm on every end.
• Specification: brass body, stainless steel press sleeve with an inspection window and insulating ring, and factory-fitted EPDM O-rings.
• Rated for heating and water: maximum working pressure 10 bar and maximum continuous temperature 80°C (95°C peak). Suitable for heating, underfloor heating and hot and cold water.
• Quick to check: each end has its own inspection window.

Pack sizes

The 32mm tee comes in boxes of 3 only.

Sold in full bags or boxes only, in the supplier's pack quantities. Choose a bag or a box, then how many packs you need. Packs are not split.

How to fit it

Cut the pipe square. Calibrate and bevel the bore with a Pipe Reaming Tool or Pipe Chamfering Tool. Push the pipe fully home until it shows in the inspection window, then press with the U-profile jaw that matches the pipe size.

Works with

• MLCP Press Fit Unequal Tee when the branch is a different size
• MLCP Press Fit Female Tee for a threaded branch
• U-Profile Press Jaws
• MLCP Fittings

Questions

Is there a bag option for 32mm?
No. The 32mm equal tee is sold in boxes of 3.

What if my branch is smaller?
Use the unequal tee, which has a reduced branch or run.

Order by 12pm, Monday to Friday, for next working day UK delivery.

Product codes: MHF5-T1216x1216x1216-BAG5, MHF5-T1216x1216x1216-BOX15, MHF5-T1620x1620x1620-BAG3, MHF5-T1620x1620x1620-BOX12, MHF5-T2025x2025x2025-BAG2, MHF5-T2025x2025x2025-BOX6, MHF5-T2632x2632x2632-BOX3