MLCP Press Fit Equal Tee: an inspection window on every end (video guide)

The MaxHeatUFH MLCP press fit equal tee takes a branch off a multilayer pipe run, with all three ends the same size, for heating, underfloor heating, and hot and cold water. Each end has its own inspection window.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• All three ends the same size
• 16, 20, 25 and 32mm (32mm box of 3 only)
• Inspection window on every end
• Insulating ring stops aluminium and brass corroding
• Rated to 10 bar, 80°C continuous, 95°C peak

How to fit it

1. Cut each pipe square, calibrate and bevel the bore
2. Check for burrs
3. Push all three pipes fully home until they show in the windows
4. Press each end with the U-profile jaw for that size

Buy it

The MLCP Press Fit Equal Tee is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.