Home / Help centre / Underfloor Heating in Northern Ireland

Underfloor Heating in Northern Ireland

We supply underfloor heating across Northern Ireland, including Belfast, Derry~Londonderry, Lisburn, Newry, Armagh and Enniskillen. For one recent Northern Ireland project we produced a full loop design, with flow temperatures, flow rates and room outputs, then supplied the complete in-screed system.

Oil-heated homes

Most homes in Northern Ireland heat with oil, far more than anywhere else in the UK. Underfloor heating works with an oil boiler today, and it's ready for a heat pump later if the floor is designed for a low flow temperature now. See underfloor heating with a boiler and with a heat pump.

Self-builds and rural homes

Northern Ireland has a strong self-build tradition, with many detached rural homes. A new build is the best time for pipe-in-screed: clip the pipe to the insulation, screed over, and the whole ground floor becomes the heat emitter. See how to install water underfloor heating.

Full loop design

For larger homes, we can produce a full loop design with flow rates for every loop, so your installer can balance the manifold correctly. See balancing underfloor heating loops.

Supply only, or supply and install

  • Supply only: Delivery cost and timing for your Northern Ireland postcode are shown at checkout.
  • Supply and install: we arrange installation through our approved installers, with MaxHeatUFH technical support on every job. As a guide, labour is £20/m² + VAT for clip rail and pipe clipped to insulation in screed, and £25/m² + VAT for other systems, including electric. Send an installation enquiry with your floor plans and we'll confirm the price.
  • Installers and builders: apply for a trade account for trade pricing on every order.

Grants

The Boiler Upgrade Scheme does not apply in Northern Ireland. Check NI Direct and the Northern Ireland Housing Executive for any current local energy schemes.

Get a design and price in minutes

Upload your floor plan to MaxHeatUFH ProLoop. It lays out every loop, sizes the manifold and prices the full kit, usually in about three minutes. It's free, and you don't need an account to start.

Our projects in this area

Nearby: Scotland · North West · All UK areas

Still need help?We reply within 24 hours on working days.
sales@maxheatufh.com