MLCP Press Fit Lever Ball Valve: full bore, no flame, no threads (video guide)

The MaxHeatUFH MLCP press fit lever ball valve is a full-bore brass isolating valve with U-profile press ends on both sides. Isolate UFH circuits, manifold flow and return, heating zones and water services, with no flame and no threads to seal.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• Full bore, press ends both sides
• 16, 20, 25 and 32mm
• Chrome-plated brass ball, PTFE seats
• Rated to 10 bar (limited by the press joint), 80°C continuous
• Red lever for flow or hot, blue for return or cold
• Lever in line with the pipe = open

How to fit it

1. Position it so the lever can turn a full quarter turn
2. Cut, calibrate and bevel the pipe
3. Push home and press each end
4. Pressure test with the valve open, then close it to check it holds
5. Work it fully open and closed once a year

Buy it

The MLCP Press Fit Lever Ball Valve is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.