MLCP Press to Copper Brass Tail: tie multilayer into existing copper (video guide)

The MaxHeatUFH MLCP press fit to copper brass tail has a U-profile press end for multilayer pipe and a plain brass tail sized for copper. The tail goes into a 15, 22 or 28mm compression, soldered or copper press fitting.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• U-profile press end for multilayer pipe
• Plain brass tail sized for copper
• Into compression, soldered or copper press fittings
• 6 sizes, 16 x 15mm up to 32 x 28mm
• First figure is MLCP, second is copper

How to fit it

1. Cut, calibrate and bevel the multilayer pipe
2. Push home until it shows in the window
3. Press with the U-profile jaw
4. Make the copper-side joint following that fitting's instructions
5. Pressure test before covering and check for weeps

Buy it

The MLCP Press Fit to Copper Brass Tail is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.