MLCP Press Fit Unequal Tee: reduce and branch in one fitting (video guide)

The MaxHeatUFH MLCP press fit unequal tee branches multilayer pipe where the run and branch are different sizes, such as taking 16mm circuits off a 20, 25 or 32mm main. Reduce and branch in one, with fewer joints.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• Run and branch in different sizes
• 13 size combinations
• 16 x 20 x 16mm up to 32 x 25 x 32mm
• Read as run x branch x run
• Rated to 10 bar, 80°C continuous, 95°C peak
• Three 32mm sizes come by the box of 3 only

How to fit it

1. Cut the pipe square, calibrate and bevel the bore
2. Push each pipe home until it shows in its window
3. Press each end with the jaw that matches its pipe size
4. If buried in plaster or mortar, protect it first

Buy it

The MLCP Press Fit Unequal Tee is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.