MLCP Press Fit Female Tee: take a vent, gauge or drain off the run (video guide)

The MaxHeatUFH MLCP press fit female tee has press ends on the run and a 1/2" female BSP branch. Take a drain cock, air vent, gauge, sensor pocket or tap connector straight off a multilayer run.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• Press ends on the run
• 1/2" female BSP branch
• Run sizes 20, 25 or 32mm
• Rated to 10 bar
• 80°C continuous, 95°C peak
• Drain cock, air vent, gauge, sensor pocket or tap connector

How to fit it

1. Seal the branch thread with PTFE tape or cord and make it first
2. Cut, calibrate and bevel each pipe
3. Push home until it shows in the window
4. Press both run ends
5. Pressure test before covering and check for weeps

Buy it

The MLCP Press Fit Female Tee is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.