MLCP Press Equal Straight Connector: the everyday multilayer coupling (video guide)

The MaxHeatUFH MLCP press fit equal straight connector joins two lengths of multilayer pipe of the same size. It's the everyday coupling for manifold tails, radiator circuits and plumbing runs, on heating, underfloor heating, and hot and cold water.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• Joins two equal-size multilayer pipes
• 16, 20, 25 and 32mm
• Rated to 10 bar
• 80°C continuous, 95°C peak
• Heating, UFH, hot and cold water

How to fit it

1. Cut square with a multilayer pipe cutter
2. Calibrate and bevel the bore, check for burrs
3. Push in until the pipe shows in the inspection window
4. Seat the U-profile jaw on the ring and press
5. Pressure test before covering and check each joint for weeps

Buy it

The MLCP Press Fit Equal Straight Connector is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.