MLCP Press Fit End Cap: a permanent blank with no threads to weep (video guide)

The MaxHeatUFH MLCP press fit end cap closes off the end of a multilayer pipe for good. Use it on a spare circuit, a dead leg you're taking out, or a pipe left for a future connection.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• Permanent blank for multilayer pipe
• No threads, nothing to weep
• 16, 20, 25 and 32mm
• Rated to 10 bar
• Spare circuits, dead legs, future connections

How to fit it

1. Cut the pipe square, calibrate and bevel it
2. Push fully home until it shows in the window
3. Seat the U-profile jaw on the ring and press
4. Pressure test before the pipe is covered and check for weeps
5. To reconnect later, cut the pipe behind the cap

Buy it

The MLCP Press Fit End Cap is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.