Eurocone Connector Cores 3/4": 8 pipe sizes, 10 to 20mm (video guide)

Eurocone connector cores join underfloor heating and multilayer pipe to 3/4" Eurocone manifold outlets, splitters and adaptors. Each core is a nut, split olive and pipe insert in nickel-plated brass, in eight pipe sizes from 10 x 1.3mm up to 20 x 2mm.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• Fits 3/4" Eurocone manifold outlets, splitters and adaptors
• Nut, split olive and pipe insert
• Nickel-plated brass
• 8 pipe sizes, from 10 x 1.3mm to 20 x 2mm
• Match the core to the size printed on your pipe
• 2 per loop, one flow and one return
• Sold individually

How to fit it

1. Cut the pipe square and ream the end
2. Slide on the nut, then the olive, and push the insert fully into the pipe
3. Hand tighten onto the outlet, then finish with a spanner. Don't overtighten
4. Hold the outlet so the bar doesn't twist
5. Check for weeps during the pressure test and again at temperature

Buy it

The Eurocone Connector Cores 3/4" is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.