Manifold Pressure Gauge End Unit: system pressure at a glance (video guide)

The MaxHeatUFH manifold pressure gauge end unit fits on the end of a manifold bar and shows system pressure at a glance. Check the fill and spot a pressure drop early. The gauge reads 0 to 10 bar, the same as on the Dualmix manifold.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• Fits on the end of a manifold bar
• Gauge reads 0 to 10 bar
• Same scale as the Dualmix manifold gauge
• Check the fill at a glance
• Spot a pressure drop early

How to fit it

1. Isolate the manifold and release the pressure
2. Remove the old gauge
3. Fit the new gauge with the dial facing out
4. Open the ball valves and refill
5. Compare the reading with the boiler or test pump gauge

Buy it

The Manifold Pressure Gauge End Unit is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.