MTA Terminal Adaptor 16mm x 1/2": compression joint, no press (video guide)

The MaxHeatUFH MTA terminal adaptor connects 16mm underfloor heating pipe to valves or fittings. A compression socket takes the pipe, and a 1/2" male thread makes the connection.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• For 16mm UFH pipe
• 1/2" male thread
• Compression joint, no press
• Connects to valves or fittings

How to fit it

1. Cut the pipe square and ream it
2. Push it fully into the compression socket
3. Tighten the nut while holding the body steady
4. Seal the thread with a heating-rated sealant and screw in
5. Check for weeps during the pressure test

Buy it

The MTA Terminal Adaptor 16mm x 1/2" is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.