Copper M-Press Unequal Tee: Replaces a Tee and Reducers (video guide)

The copper M-press unequal tee from MaxHeatUFH takes a branch off a copper run where one or more ends are a different size. One tee does the job of a tee and reducers, so there are fewer fittings and fewer joints.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• One or more ends a different size
• Replaces a tee plus reducers
• Read as end, branch, end
• 22-15-22 = 22mm run, 15mm branch
• 15-22-15mm to 42-28-42mm, bag or box

How to fit it

1. Cut each tube square, deburr and wipe clean
2. Mark the insertion depth
3. Push in to the mark
4. Press each end with the M-profile jaw that matches its size
5. Check every joint is pressed, then pressure test all three ends

Buy it

The Copper M-Press Unequal Tee is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.