Copper M-Press Tap Connector: No Flame in Tight Cupboards (video guide)

The copper M-press tap connector from MaxHeatUFH joins copper tube to a tap tail or other male threaded outlet. A quick tube-to-tail joint at basins, sinks and appliances, with no flame in tight cupboards.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• Copper tube to a tap tail
• Basins, sinks and appliances
• 5 sizes, 15mm x 1/2" to 28mm x 1 1/4"
• Tube size first, then the tap tail thread
• No flame in tight cupboards

How to fit it

1. Seal the threaded end and do it up onto the tail
2. Cut and deburr the tube and mark the depth
3. Push in to the mark and press with the same-size M-profile jaw
4. Check the tube end is pressed, then pressure test and check both ends

Buy it

The Copper M-Press Tap Connector is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.