Copper M-Press Male Elbow: Flame-Free Near Plastics and Controls (video guide)

The copper M-press male elbow from MaxHeatUFH presses onto copper tube at one end, with a male thread at the other and a 90° turn between. Screw it into a valve, cylinder, manifold or appliance. It is flame-free, so safe near plastic parts and controls.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• Press end x male thread, 90°
• Into a female port on a valve, cylinder, manifold or appliance
• 15mm x 1/2", 22mm x 3/4", 28mm x 1" male
• All press with MH-EHCS or MH-HPEHCS M-profile jaws
• Flame-free near plastics and controls

How to fit it

1. Seal the thread and screw the elbow into the port first
2. Then cut, deburr and mark the tube
3. Push in to the mark and run a full press cycle
4. Check the joint is pressed, then pressure test and check for weeps

Buy it

The Copper M-Press Male Elbow is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.