Copper M-Press Lever Ball Valve, Female: Valve and Adaptor in One (video guide)

The copper M-press lever ball valve with female connection from MaxHeatUFH has a press end on one side and a female thread on the other. Isolate straight onto a male threaded pump, manifold, cylinder or appliance. It is a valve and adaptor in one.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• Press end x female thread
• Isolate onto a pump, manifold, cylinder or appliance
• 4 sizes, 15mm x 1/2" to 35mm x 1 1/4"
• Red or blue lever
• Tube size first, then the female thread

How to fit it

1. Seal the threaded end in the normal way. Only the tube end is pressed
2. Cut, deburr and mark the tube
3. Push in to the mark and press with the same-size M-profile jaw
4. Check the press end is pressed, then pressure test and check both ends

Buy it

The Copper M-Press Lever Ball Valve with Female Connection is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.