Copper M-Press Fitting Reducer: Reduce Straight Off a Tee (video guide)

The copper M-press fitting reducer from MaxHeatUFH has a spigot on the large end that pushes into another press fitting, and a press socket on the small end. Reduce straight off a tee, elbow or valve with no short piece of larger tube.

Watch the full video and the quick version below, and download the data sheet and install manual for the exact specification.

Key facts

• Spigot on the large end, press socket on the small end
• Reduce straight off a tee, elbow or valve
• 12 sizes, 22-15mm to 54-42mm
• Includes 54-22mm
• Spigot size is always written first

How to fit it

1. Push the spigot fully into the other fitting and press that socket
2. Cut, deburr and mark the smaller tube
3. Push in to the mark and press with the matching M-profile jaw
4. Check every joint is pressed, then pressure test and check for weeps

Buy it

The Copper M-Press Fitting Reducer is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.