Copper M-Press Female Elbow: Tube to Thread, No Adaptor (video guide)

The copper M-press female elbow from MaxHeatUFH turns 90° from copper tube to a female thread. Press the tube end and screw a valve, drain cock or appliance connection into the other, with no separate adaptor needed.

Watch the full video and the quick version below, and download the data sheet and install manual for the exact specification.

Key facts

• 90° from copper tube to female thread
• Takes a valve, drain cock or appliance connection
• No separate adaptor
• 15mm x 1/2" female
• 22mm x 3/4" female
• 28mm x 1" female

How to fit it

1. Seal the threaded end as normal. Only the tube end is pressed
2. Cut, deburr and mark the tube
3. Push in to the mark and press with the same-size M-profile jaw
4. Check the joint is pressed, then pressure test and check both ends for weeps

Buy it

The Copper M-Press Female Elbow is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.