Copper M-Press Elbow i/a: Tight Turn, No Offcut to Press (video guide)

The copper M-press 90° elbow i/a from MaxHeatUFH has a press socket on one end and a plain spigot on the other. The spigot pushes straight into a tee, coupling or valve, giving a tight turn with no short offcut of tube to cut and press.

Watch the full video and the quick version below, and download the data sheet and install manual for the exact specification.

Key facts

• 90° elbow, press socket x spigot
• Spigot pushes into another press fitting
• 15 to 54mm for copper tube
• 54mm by the box only
• 15-28mm: MH-EHCS or MH-HPEHCS jaws
• 35-54mm: MH-HPEHCS jaws only

How to fit it

1. Push the spigot fully into the other fitting and press that socket
2. Cut and deburr the tube and mark the insertion depth
3. Push the tube in to the mark and run a full press cycle
4. Check the mark hasn't moved
5. Check every joint is pressed, then pressure test and check for weeps

Buy it

The Copper M-Press Elbow i/a is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.