MLCP Press Radiator Elbow 16 x 15mm: Straight Into a Rad Valve (video guide)

The 16 x 15mm MLCP press radiator elbow from MaxHeatUFH is a 16mm U-profile press elbow with a 15mm radiator pipe already fitted. Bring a 16mm circuit up through the floor or out of the wall and go straight into any 15mm compression radiator valve.

Watch the full video and the quick version below, and download the data sheet and install manual for the exact specification.

Key facts

• 16mm U-profile press elbow, 15mm tail fitted
• Into any 15mm compression radiator valve
• Chrome tail 150 or 300mm, or copper 300mm
• Brass body, stainless steel press sleeve, EPDM O-rings
• Rated to 10 bar and 80°C continuous
• Sold singly

How to fit it

1. Cut and ream the 16mm pipe
2. Push home until it shows in the window, press with the 16mm jaw
3. Measure to the valve and cut the tail square
4. Deburr the tail and connect it to the radiator valve

Buy it

The MLCP Press Radiator Elbow 16mm x 15mm with Pipe is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.