16mm MLCP Compression Elbow: 90° Turn, No Press Tool (video guide)

The 16mm MLCP compression elbow from MaxHeatUFH turns 16 x 2.0mm multilayer pipe through 90°. With no press tool needed, it suits repairs, awkward runs and anywhere a press tool can't reach.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• 90° turn for 16 x 2.0mm multilayer pipe
• Brass body with insert, olive and nut on each end
• Insert supports the pipe bore
• Rated to 10 bar and 95°C
• No press tool needed
• Sold singly

How to fit it

1. Check the size printed on the pipe matches
2. Cut each end square and ream it
3. Slide on the nut and olive, push the pipe fully onto the insert
4. Hand tight, then a spanner holding the body. Don't overtighten
5. Check both ends for weeps during the pressure test

Buy it

The 16mm MLCP Compression Elbow is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.