UFH Grid Membrane 1.2m Wide: Set out pipe centres without measuring (video guide)

A printed grid membrane that rolls out over the insulation before screeding. Set out 100, 150 or 200mm centres without measuring every run, and give tacker clips a tough layer to grip.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• Printed grid for 100, 150 or 200mm centres
• Tough layer for tacker clips
• For tacker systems under screed
• 1.2m wide
• 50m roll covers 60m²
• 100m roll covers 120m²

How to fit it

1. Roll out over the insulation, grid face up
2. Line up with the pipe layout
3. Overlap and tape joints so screed can't get under
4. Lay pipe on the grid lines and fix with tacker clips

Buy it

The Underfloor Heating Grid Membrane 1.2m Wide is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.