Self-Adhesive Pipe Clip Rail 1m: No screws, even pipe centres (video guide)

A 1m self-adhesive pipe clip rail for underfloor heating, so no screws are needed. The lengths interlock end to end to make any run, and hold every pipe in line at even centres.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• 1m rail lengths
• Self-adhesive backing, no screws
• Interlocks end to end for any run
• Holds every pipe in line at even centres

How to fit it

1. Run rails at right angles to the pipe, every 1 to 1.2m
2. Peel the backing and press down firmly
3. Clip loops in at design centres, pipe clips on tight bends
4. Fill, flush, vent and hold 6 bar for 1 hour
5. Press any lifting rail back down before screeding

Buy it

The Self-Adhesive Pipe Clip Rail (1m) is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.