Single Room Pump Pack, Bastion 6m: Heat one room off a radiator circuit (video guide)

A simple way to heat one standard room from an existing radiator or boiler circuit, with no manifold. The thermostatic valve holds the loop at 35 to 60°C, giving up to about 3kW, and it comes with a Bastion A-rated 6m pump and its power cable.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• One room, no manifold needed
• Holds 35 to 60°C, within about ±2°C
• Up to about 3kW
• Bastion A-rated 6m pump, cable included
• Rated to 10 bar
• ½" UFH tappings, 15mm primaries on isolating valves
• Pre-wired pipe stat: pump on at 42°C, off at 31°C

How to fit it

1. Mount level on a wall, never on the floor or shaft vertical
2. Connect the loop and primaries, making sure air can vent
3. Electrician wires it from a 3A fused spur
4. After screed drying: about 40 to 45°C for screed, 55 to 60°C for timber
5. Pressure test the loop before screeding
6. Floor max 29°C, 35°C in bathrooms, 27°C under timber and laminate

Buy it

The Single Room UFH Mixing Pump Pack with Bastion A-Rated 6m Pump is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.