Pipe Support Bend: Supported 90° turn up to the manifold (video guide)

A pipe support bend that holds the pipe in a smooth, supported 90° turn where it rises from the floor to the manifold, so it doesn't kink or flatten. Sold singly; you'll usually need two per loop.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• Supported 90° turn
• No kinks or flattening
• For pipe rising to the manifold
• Sold singly
• Usually 2 per loop

How to fit it

1. Mark below each manifold port
2. Clip the pipe in and fix it rising straight up
3. Keep bends evenly spaced
4. Cut to length and connect with a Eurocone core
5. Check for kinks or flattening before screeding

Buy it

The Pipe Support Bend is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.