Pipe Decoiler: Lay UFH pipe alone with no twists (video guide)

A pipe decoiler that holds a coil of underfloor heating pipe and turns as you pull, so the pipe pays out without twisting or tangling. Loops go down faster and flatter, and one person can lay pipe alone.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• Turns as you pull the pipe
• No twisting or tangling
• Faster, flatter loops, easier to clip
• One-person pipe laying
• Arrives flat-packed
• Assembles with the thumb screws supplied

How to fit it

1. Fit the legs and base arms into the centre hub
2. Add the pole and top hub, then upper arms and uprights
3. Tighten the thumb screws
4. Spin it empty to check it turns freely
5. Load the coil, cut the straps, pull from the outside

Buy it

The Pipe Decoiler is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.