Pipe Cutter 14-32mm: Square cuts for press and compression joints (video guide)

A pipe cutter for plastic and multilayer pipe from 14 to 32mm, covering 16, 20, 25 and 32mm multilayer. A clean, square cut is the first step to a good press or compression joint, and it fits in a tool pouch.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• Cuts plastic and multilayer pipe
• 14 to 32mm range
• Covers 16, 20, 25 and 32mm multilayer
• Clean, square cuts
• Fits in a tool pouch

How to fit it

1. Mark the cut
2. Set the blade on the mark, square to the pipe
3. Squeeze steadily without twisting or rocking
4. Check the cut is square
5. Ream or chamfer the end to protect the O-rings

Buy it

The Pipe Cutter 14-32mm is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.