Overlay Panel Washers, Pack of 100: no screw pull-through (video guide)

MaxHeatUFH overlay panel washers are made for fixing underfloor heating overlay panels, 100 to a pack. Fit one under each screw head. The wider bearing area holds the board firmly without the screw pulling through.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• Made for UFH overlay panels
• 100 per pack
• One under each screw head
• Wider bearing area holds the board firmly
• Stops the screw pulling through

How to fit it

1. Lay the overlay boards as designed
2. Put a washer on each screw
3. Drive until the washer sits flat and firm, without crushing the board
4. Keep every fixing clear of the pipe grooves
5. Check every board is firm with no rocking before laying pipe

Buy it

The Overlay Panel Washers (Pack of 100) is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.