MLCP Pipe Straightener 16-20mm: takes out the coil set, no damage (video guide)

The MaxHeatUFH multilayer pipe straightener takes the coil set out of multilayer pipe. Pull the pipe through the hardened rollers and it comes out straight without damaging the outer layer, for neat manifold tails, surface runs and radiator connections.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• Removes the coil set from multilayer pipe
• Hardened rollers, no damage to the outer layer
• For 16mm or 20mm pipe
• Manifold tails, surface runs and radiator connections

How to fit it

1. Set it for 16mm or 20mm pipe
2. Feed the pipe end in from the coil
3. Pull steadily through in one direction
4. Cut off the straight length you need
5. Check the surface for marks after the first pass

Buy it

The Multilayer (MLCP) Pipe Straightener 16 to 20mm is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.