Manifold Flow Meter: see and balance the flow in each loop (video guide)

The MaxHeatUFH manifold flow meter sits on the flow bar and shows how much water is going round each loop, from 0 to 5 litres a minute. Use it to balance the system so every room heats evenly, and to spot a loop that isn't flowing.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• Sits on the flow bar
• Reads 0 to 5 litres a minute
• One per loop
• Balance the system so every room heats evenly
• Shows when a loop isn't flowing
• Not sure it matches? Send us a photo

How to fit it

1. Check it matches the meters already on your manifold
2. Isolate the manifold and release the pressure
3. Swap the old meter for the new one
4. Refill, vent and set the loop to its design flow rate
5. Check it reads with the loop open and drops to zero when closed

Buy it

The Manifold Flow Meter is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.