MLCP Press Reducing Straight Connector: two pipe sizes, one joint (video guide)

The MaxHeatUFH MLCP press fit reducing straight connector joins multilayer pipe of two different sizes in a straight line, for example stepping a 20mm main down to 16mm for a UFH or radiator circuit, in one joint with no separate reducer.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• Two pipe sizes, one straight joint
• 6 reductions, 20 x 16mm up to 32 x 25mm
• Large end quoted first
• Needs a U-profile jaw for each pipe size
• Brass body, stainless steel press sleeve
• Rated to 10 bar, 80°C continuous, 95°C peak

How to fit it

1. Cut each pipe square, calibrate and bevel the bore
2. Push each pipe in until it shows in the window
3. Press each end with the jaw for its own size
4. If buried in plaster or mortar, protect with boxing, tape or a foam sleeve

Buy it

The MLCP Press Fit Reducing Straight Connector is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.