MLCP Press Fit Male Elbow: saves you an elbow and an adaptor (video guide)

The MaxHeatUFH MLCP press fit male elbow is a 90° fitting with a U-profile press end and a male BSP thread. Use it where the pipe arrives at a right angle to a female-threaded valve, fitting or manifold, so it turns and connects in one.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• 90° U-profile press end to male BSP
• Turns and connects in one, saving an elbow and adaptor
• 5 sizes
• From 16mm x 1/2" up to 32mm x 1"
• Into female-threaded valves, fittings and manifolds

How to fit it

1. Seal the male thread with PTFE tape or cord
2. Screw it in before you press
3. Cut the pipe square, calibrate and bevel it
4. Push home until it shows in the window, then press
5. Pressure test and look for weeps before covering

Buy it

The MLCP Press Fit Male Elbow is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.