MLCP Press Fit Equal Elbow: a 90° turn in less space than a bend (video guide)

The MaxHeatUFH MLCP press fit equal elbow turns a multilayer pipe run through 90°, with the same pipe size on both ends. You get a full turn in much less space than a bend, for tight corners where bending isn't practical.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• 90° turn, same size both ends
• 16, 20, 25 and 32mm
• Rated to 10 bar
• 80°C continuous, 95°C peak
• Above 26mm, elbows recommended over bending

How to fit it

1. Cut the pipe square, calibrate and bevel the bore
2. Push home until it shows in the inspection window
3. Press with the U-profile jaw for that size
4. Check every joint is pressed and the pipe shows in each window
5. Pressure test before covering and check for weeps

Buy it

The MLCP Press Fit Equal Elbow is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.