MLCP Manual Pipe Bender 16-32mm: kink-free bends without fittings (video guide)

The MaxHeatUFH multilayer manual pipe bender is a hand lever bender for neat, kink-free bends in multilayer pipe, without fittings. Fewer joints mean lower cost and better flow, and no power is needed.

Watch the full video and the quick version below, and download the data sheet and install manual for the exact specification.

Key facts

• Bends 16, 20, 25 and 32mm multilayer pipe
• Up to 90°
• Interchangeable former for each size
• Fewer joints, lower cost, better flow
• No power needed

How to fit it

1. Fit the former for your pipe size
2. Mark the start of the bend and line it up in the former
3. Pull the lever steadily round to the angle you need
4. Release and lift the pipe out
5. Check each bend is round with no flattening or kinks

Buy it

The MLCP Manual Pipe Bender 16-32mm is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.