U-Profile Press Jaw 16-32mm: spare jaw for MLCP press fittings (video guide)

A U-profile press jaw for the MaxHeatUFH Electric Hydraulic Press Tool (EHCS), for multilayer press fittings. Use it as a spare or extra jaw for MaxHeatUFH MLCP fittings and other U-profile systems.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• U-profile jaw for multilayer press fittings
• 16, 20, 25 and 32mm
• Hardened steel, sold individually
• Fits the EHCS only
• Not for copper M-press fittings or the HPEHCS

How to fit it

1. Check the jaw size matches the pipe and fitting
2. Fit it into the EHCS head
3. Seat it on the fitting's locating ring
4. Run a full press cycle, then open and remove
5. Check the sleeve is pressed evenly and the pipe shows in the window

Buy it

The MaxHeatUFH U-Profile Press Jaw for MH-EHCS is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.