M Press Angled Jaw Set 15/22/28mm: reaches where a straight jaw can't (video guide)

The MaxHeatUFH M press angled jaw set is three angled M-profile jaws for the High Power Electric Hydraulic Press Tool (HPEHCS). The three sizes cover most domestic heating and water work, in spots a straight jaw can't reach.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• Three angled M-profile jaws
• One each of 15, 22 and 28mm
• For copper M-press fittings
• Fits the HPEHCS only
• For the EHCS, use the straight M-profile jaws

How to fit it

1. Pick the jaw that matches the fitting size
2. Fit it into the HPEHCS head as the manual shows
3. Place it square over the fitting bead
4. Run a full press cycle, then open and remove
5. Check the press mark is even all the way round

Buy it

The MaxHeatUFH M Press Angled Jaw Set 15/22/28mm (for MH-HPEHCS) is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.