MaxHeatPanel Routed XPS Board: tile direct, no screed to wait for (video guide)

MaxHeatPanel is a CNC-routed XPS insulation board for wet underfloor heating on solid floors. Bond it down, press the pipe into the grooves and tile directly onto the board, with no screed to wait for.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• CNC-routed XPS board for solid floors
• 1200 x 600mm, 4 grooves at 150mm centres
• 18mm board for 12mm pipe, 25mm for 16mm pipe
• 10 boards per box
• Tile direct, no screed
• 75°C board temperature limit

How to fit it

1. Make sure the subfloor is clean, dry and level
2. Lay the boards tight together and bond them down
3. Press the pipe in to the loop design
4. Pressure test to BS EN 1264 and record the result
5. Tile directly onto the boards

Buy it

The MaxHeatPanel Routed XPS Board, Tile Direct (1200 x 600mm) is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.