MaxHeatPro Foil-Faced EPS Panel: float under wood or tile direct (video guide)

MaxHeatPro is a grooved EPS underfloor heating panel with a 100 micron aluminium foil face that spreads heat from the pipe across the floor. Lay it floating under wood or laminate, or bond it down and tile straight on top.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• Grooved EPS with 100 micron aluminium foil face
• 1200 x 600mm, 400 kPa EPS core
• 16mm panel for 12mm pipe, 20mm panel for 16mm pipe
• Typical outputs up to 76 W/m²
• Floating under wood or laminate, or bonded and tiled

How to fit it

1. Dry-lay and number the panels, prime them and the subfloor
2. Bed in flexible tile adhesive, at least 3mm deep
3. Tape the joints and clear every groove
4. Press the pipe in from a decoiler
5. Pressure test to BS EN 1264, then prime and tile direct

Buy it

The MaxHeatPro Foil-Faced EPS Panel (1200 x 600mm) is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.