Castellated Floor Panel 1220 x 820mm: no clips needed (video guide)

The MaxHeatUFH castellated floor panel is for wet underfloor heating finished with screed or self-levelling compound. The pipe pushes in between the raised bosses, so there are no clips to fix, and it holds the pipe while the floor is poured.

Watch the full video and the quick version below, and download the data sheet and install manual for the exact specification.

Key facts

• 20mm castellated panel
• Takes 15, 16 or 17mm pipe
• Large 1220 x 820mm sheets, fewer panels to lay
• Pipe pushes between the bosses, no clips
• For screed or self-levelling compound

How to fit it

1. Prepare the subfloor and fit edge insulation foam
2. Lay the panels across the floor, cutting at the walls
3. Push the pipe in to the loop design
4. Connect each loop to the manifold, then pour
5. Pressure test to BS EN 1264 before pouring and keep under pressure

Buy it

The MaxHeatUFH Castellated Floor Panel 1220 x 820mm is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.