Manual Pressing Clamp Tool Set 16-32mm: no battery or power needed (video guide)

The MaxHeatUFH manual pressing clamp tool set is a hand press for U-profile multilayer press fittings. It comes with 16, 20, 25 and 32mm heads and needs no battery or power. It is not for copper M-press fittings.

Watch the full video and the quick version below, and download the data sheet and install manual for the exact specification.

Key facts

• Hand press for U-profile multilayer fittings
• 16, 20, 25 and 32mm U-profile heads
• No battery or power needed
• Not for copper M-press fittings

How to fit it

1. Cut the pipe square, ream and chamfer it
2. Push the pipe fully into the fitting
3. Fit the matching head and place it square over the sleeve
4. Close the handles fully. Don't stop part way
5. Check the press mark is even all round, then pressure test

Buy it

The Manual Pressing Clamp Tool Set (16-32mm U Profile) is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.