Hydraulic Pressure Test Pump: find leaks before the screed goes down (video guide)

A manual lever pump for pressure testing underfloor heating loops, manifolds, and plumbing and heating pipework before screeding or boxing in. It tests from 0 to 50 bar on a built-in gauge, so you find leaks before the screed goes down.

Watch the full video and the quick version below, and download the data sheet and install manual for the exact specification.

Key facts

• Manual lever test pump
• For UFH loops, manifolds, plumbing and heating pipework
• 0 to 50 bar on a built-in gauge
• 12 litre tank
• 1/2" BSP male hose connection
• Fluid up to 50°C

How to fit it

1. Fill the tank with clean water, connect the hose, close the purge valve
2. Fill and bleed the system
3. Pump to your design test pressure, close the shut-off and watch the gauge
4. Hold for the design time and record start and end pressures
5. Never exceed the rating of anything under test
6. Release the pressure before disconnecting

Buy it

The Hydraulic Pressure Test Pump for Underfloor Heating & Plumbing Systems is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.