External Bending Spring: kink-free hand bends in multilayer pipe (video guide)

An external bending spring slides over multilayer pipe and supports the outside wall while you bend it by hand, so tight bends don't kink. Bend instead of fitting an elbow. Available in 16, 20, 25 and 32mm.

Watch the full video and the quick version below, and download the data sheet and install manual for the exact specification.

Key facts

• Supports the outside wall of the pipe
• Tight hand bends without kinking
• Bend instead of fitting an elbow
• 16, 20, 25 and 32mm sizes
• Keep it clean and free of grit

How to fit it

1. Pick the spring to match the pipe's outside size
2. Slide it over your mark for the bend centre
3. Bend slowly by hand, spreading the bend along the spring
4. Over-bend slightly if needed, ease back, then slide it off
5. Check the bend is round with no flattening or kinks

Buy it

The External Bending Spring is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.