ESBE Single Room UFH Mixing Pack, Bastion 6m Pump: Pump Included (video guide)

The ESBE single room mixing pack with Bastion 6m pump from MaxHeatUFH runs one underfloor heating circuit straight off a radiator or boiler circuit. The ESBE valve mixes to 35 to 60°C, and a Bastion A-rated 6m pump and power cable are included.

Watch the full video and the quick version below, and download the data sheet and install manual for the exact specification.

Key facts

• One UFH circuit off a radiator or boiler circuit
• Swedish-made ESBE thermostatic valve with built-in bypass
• Mixed flow 35 to 60°C
• Bastion A-rated 6m pump with power cable
• Rated to 10 bar static and 95°C
• 15mm compression primaries on isolating ball valves; 1/2" female loop connections
• Pre-wired 40°C switch on the primary inlet runs the pump

How to fit it

1. Return is on the left. The top section turns 180° to reverse it
2. Fix the back plate level and connect the primaries and loop
3. An electrician wires it to a 3A fused spur and the room thermostat
4. Fill the loop fully, vent the pump and set the dial
5. Check every joint before filling and pressure test before screeding
6. Check the mixed flow against the dial with a digital thermometer

Buy it

The ESBE Single Room UFH Mixing Pump Pack with Bastion A-Rated 6m Pump is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.