ESBE Single Room UFH Mixing Pack, Valve Only: Fit Your Own Pump (video guide)

The ESBE single room mixing pack, valve only, from MaxHeatUFH runs one underfloor heating circuit straight off a radiator or boiler circuit. The ESBE thermostatic valve mixes to 35 to 60°C; there is no pump, so fit your own 130mm circulator.

Watch the full video and the quick version below, and download the data sheet and install manual for the exact specification.

Key facts

• One UFH circuit off a radiator or boiler circuit
• Swedish-made ESBE thermostatic valve with built-in bypass
• Mixed flow 35 to 60°C
• No pump. Fit your own 130mm circulator
• Rated to 10 bar static and 95°C
• 15mm compression primaries on isolating ball valves; 1/2" female loop connections
• Pre-wired 40°C switch on the primary inlet runs the pump

How to fit it

1. Fit your pump with new gaskets, arrow with the flow, shaft horizontal, and wire it to the terminal box
2. Return is on the left. Turn the top section to reverse it
3. Fix the back plate level and connect the primaries and loop
4. Once an electrician has wired it, fill the loop fully, vent and set the dial
5. Check every joint before filling and pressure test before screeding
6. Check the mixed flow against the dial with a digital thermometer

Buy it

The ESBE Single Room UFH Mixing Pump Pack (Valve Only, No Pump) is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.