Copper M-Press Unequal Elbow: Turn and Reduce in One Fitting (video guide)

The copper M-press unequal elbow from MaxHeatUFH turns a 90° corner and changes tube size in one fitting, saving a separate reducer and a joint. Fewer joints means fewer leak points.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• 90° turn and size change in one
• No separate reducer, fewer leak points
• 22-15, 28-15 and 28-22mm, large end first
• One M-profile jaw per end size
• The MH-EHCS does them all

How to fit it

1. Cut the tube square, deburr inside and out and wipe clean
2. Mark the insertion depth and check the seal
3. Push each tube in to its mark
4. Press each end with the jaw that matches its size
5. Check both marks are at the edges, then pressure test for weeps

Buy it

The Copper M-Press Unequal Elbow is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.