Copper M-Press Equal Tee: Branch Done in Three Presses (video guide)

The copper M-press equal tee from MaxHeatUFH takes a branch off a copper run, with all three ends the same size. Use it to split heating flow and return or feed taps and appliances. Three presses and the branch is done.

Watch the full video and the quick version below, and download the data sheet and install manual for the exact specification.

Key facts

• Branch off a copper run
• All three ends the same size
• 15, 22, 28, 35, 42 or 54mm
• Full bags or boxes
• 54mm by the box only

How to fit it

1. Cut each tube square, deburr and wipe clean
2. Mark the insertion depth and push the tube in to the mark
3. Press with the same-size M-profile jaw and check the mark didn't move
4. Repeat on all three ends
5. Check all three joints are pressed, then pressure test and check for weeps

Buy it

The Copper M-Press Equal Tee is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.