Copper M-Press Equal Elbow: No Flame, No Hot Works Permit (video guide)

The copper M-press equal elbow from MaxHeatUFH is a 90° elbow for turning corners on heating and hot and cold water runs. It is pressed with M-profile jaws, and with no flame there is no hot works permit.

Watch the full video and the quick version below, and download the data sheet and install manual for the exact specification.

Key facts

• 90° equal elbow for copper tube
• Heating, hot and cold water
• 6 sizes, 15 to 54mm
• 54mm by the box only
• 15-28mm: MH-EHCS or MH-HPEHCS jaws
• 35-54mm: MH-HPEHCS jaws only

How to fit it

1. Cut each tube square, deburr and clean
2. Mark the insertion depth, check the seal is seated and undamaged
3. Push the tube in to the mark
4. Put the same-size jaw square over the bead and run a full press cycle
5. Check the mark is at the fitting edge, then pressure test and check for weeps

Buy it

The Copper M-Press Equal Elbow is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.