Copper M-Press Equal 45 Bend i/a: Compact Offset, Fewer Cuts (video guide)

The copper M-press 45° bend i/a from MaxHeatUFH has a press socket at one end and a spigot at the other. The spigot goes straight into an elbow, tee or coupling, for a compact offset with fewer cuts and no short length of tube.

Watch the full video and the quick version below, and download the data sheet and install manual for the exact specification.

Key facts

• 45° bend, press socket x spigot
• Spigot fits straight into another fitting
• 15 to 54mm for copper tube
• Sold by the box only
• 150 per 15mm box, 6 per 54mm box

How to fit it

1. Push the spigot fully into the other fitting and press that socket
2. Prepare and mark the tube
3. Push the tube in to the mark
4. Press the bend's socket with the same-size M-profile jaw
5. Check every joint is pressed, then pressure test and check for weeps

Buy it

The Copper M-Press Equal 45 Bend i/a is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.