Copper M-Press Equal 45 Bend: No Flame Near Timber (video guide)

The copper M-press equal 45° bend from MaxHeatUFH gives a gentler change of direction than a 90° elbow. Use two to step a run round a joist, beam or another pipe, with no flame near timber or insulation.

Watch the full video and the quick version below, and download the data sheet and install manual for the exact specification.

Key facts

• 45° equal bend, press x press
• M-profile, for copper tube
• 15 to 54mm, in full bags or boxes
• 54mm by the box only
• Use two to offset round an obstacle
• Pressed joints are permanent

How to fit it

1. Cut the tube square, deburr inside and out, wipe clean
2. Mark the insertion depth and check the seal is seated
3. Push the tube in to the mark
4. Press with the same-size M-profile jaw
5. Check every joint is pressed, then pressure test and check for weeps

Buy it

The Copper M-Press Equal 45 Bend is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.