Auto-Balancing Stainless Steel UFH Manifold: No Manual Balancing (video guide)

The auto-balancing stainless steel manifold from MaxHeatUFH has dynamic auto-balancing valves on the return bar. Preset each circuit with the setting key and it holds that flow as zones open and close, ideal for heat pump systems.

Watch the full video and the quick version below, and download the data sheet and install manual for the exact specification.

Key facts

• Dynamic auto-balancing valves, preset with a setting key
• 304 stainless steel bars on galvanised brackets
• 1" female mains, 3/4" Eurocone outlets at 50mm centres
• 0 to 4 L/min flow meter with shut-off on every circuit
• Rated to 6 bar and 70°C, 2 to 12 ports
• Air vents and fill and drain valves on both bars
• M30 x 1.5 actuator thread

How to fit it

1. Mount it level and fit 1" ball valves
2. Connect each loop with two Eurocone cores
3. Preset each return valve to the loop design flow with the key
4. Fit and wire the actuators, then fill and flush each loop
5. Pressure test before screeding, never above 6 bar
6. With the system running, check each flow meter matches its preset

Buy it

The Auto-Balancing Stainless Steel UFH Manifold (2 to 12 Port) is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.